Each version of a recorder has slightly different inputs and variations in how sources can be connected. However, all recorders have enough in common that there are a few basic steps to get one up and running.
Course Content
Total learning: 24 lessons
Time: 75 minutes
-
Setting Up Your Recorder
-
Recorder Basics PreviewLecture1.1
-
Connecting the Inputs PreviewLecture1.2
-
Video Source Options PreviewLecture1.3
-
Audio Source Options PreviewLecture1.4
-
Content Source Options PreviewLecture1.5
-
-
Recorder Models
-
Mediasite Pro Recorder PreviewLecture2.1
-
Mediasite Recorder PreviewLecture2.2
-
Mediasite Mobile Recorder PreviewLecture2.3
-
ML941 PreviewLecture2.4
-
ML931 PreviewLecture2.5
-
RL940 PreviewLecture2.6
-
RL930 PreviewLecture2.7
-
RL220 PreviewLecture2.8
-
RL Mini PreviewLecture2.9
-
-
Configure and Licence
-
Access the Recorder Interface PreviewLecture3.1
-
Set Time Zone PreviewLecture3.2
-
Update Network Settings PreviewLecture3.3
-
Add Mediasite Connection PreviewLecture3.4
-
Set up Scheduler PreviewLecture3.5
-
License your Recorder PreviewLecture3.6
-
Update Software PreviewLecture3.7
-
Select Inputs PreviewLecture3.8
-
Create Default Template PreviewLecture3.9
-
Record PreviewLecture3.10
-
Connecting the Inputs
The basics of setting up your recorder start with connecting all of the power, sources, network and then powering everything on.
- Connect power cable
- Connect monitor, mouse and keyboard (optional)
- Connect video source(s)
- Connect audio breakout cable
- Connect audio source
- Connect content (slide) source
- Connect network cable
- Turn on all sources
- Power on the recorder
Was this Information helpful?
Let us know if you found this lesson helpful. That’s the only way we can improve.
Modal title
Main Content