Now that you have the devices connected and the recorder powered on, there are still a few additional steps that need to be taken before pressing record. Configuring and licensing a recorder can be done either remotely or directly on the recorder by connecting a monitor, keyboard, and mouse. Because an ML recorder has a built in touch screen monitor the recorder interface is easily accessed directly.
Course Content
Total learning: 24 lessons
Time: 75 minutes
-
Setting Up Your Recorder
-
Recorder Basics PreviewLecture1.1
-
Connecting the Inputs PreviewLecture1.2
-
Video Source Options PreviewLecture1.3
-
Audio Source Options PreviewLecture1.4
-
Content Source Options PreviewLecture1.5
-
-
Recorder Models
-
Mediasite Pro Recorder (RL1040A) PreviewLecture2.1
-
Mediasite Recorder (RL1020A) PreviewLecture2.2
-
Mediasite Mobile Recorder (M1041A) PreviewLecture2.3
-
ML941 PreviewLecture2.4
-
ML931 PreviewLecture2.5
-
RL940 PreviewLecture2.6
-
RL930 PreviewLecture2.7
-
RL220 PreviewLecture2.8
-
RL Mini PreviewLecture2.9
-
-
Configure and License
-
Access the Recorder Interface PreviewLecture3.1
-
Set Time Zone PreviewLecture3.2
-
Update Network Settings PreviewLecture3.3
-
Add Mediasite Connection PreviewLecture3.4
-
Set up Scheduler PreviewLecture3.5
-
License your Recorder PreviewLecture3.6
-
Update Software PreviewLecture3.7
-
Select Inputs PreviewLecture3.8
-
Create Default Template PreviewLecture3.9
-
Record PreviewLecture3.10
-
Access the Recorder Interface
1a. Access the recorder interface using the recorders URL found on the back or bottom depending on the model.
1b. Connect a monitor, keyboard and mouse to the recorder and open the recorder UI
2. Log in to the recorder using the default credentials provided to you.
If you are unsure of the default credentials, contact Tech Support.
Was this Information helpful?
Let us know if you found this lesson helpful. That’s the only way we can improve.
Modal title
Main Content