With the updates installed and the recorder restarted, it is now ready to set up and select which of the devices you connected earlier should be captured. This step is done as part of the initial set up of a recorder but may also need to be done if the recorder has multiple devices attached and a different setting is being used.
Course Content
Total learning: 24 lessons
Time: 75 minutes
-
Setting Up Your Recorder
-
Recorder Basics PreviewLecture1.1
-
Connecting the Inputs PreviewLecture1.2
-
Video Source Options PreviewLecture1.3
-
Audio Source Options PreviewLecture1.4
-
Content Source Options PreviewLecture1.5
-
-
Recorder Models
-
Mediasite Pro Recorder (RL1040A) PreviewLecture2.1
-
Mediasite Recorder (RL1020A) PreviewLecture2.2
-
Mediasite Mobile Recorder (M1041A) PreviewLecture2.3
-
ML941 PreviewLecture2.4
-
ML931 PreviewLecture2.5
-
RL940 PreviewLecture2.6
-
RL930 PreviewLecture2.7
-
RL220 PreviewLecture2.8
-
RL Mini PreviewLecture2.9
-
-
Configure and License
-
Access the Recorder Interface PreviewLecture3.1
-
Set Time Zone PreviewLecture3.2
-
Update Network Settings PreviewLecture3.3
-
Add Mediasite Connection PreviewLecture3.4
-
Set up Scheduler PreviewLecture3.5
-
License your Recorder PreviewLecture3.6
-
Update Software PreviewLecture3.7
-
Select Inputs PreviewLecture3.8
-
Create Default Template PreviewLecture3.9
-
Record PreviewLecture3.10
-
Select Inputs
9. Go to Recorder > Inputs. Select the desired input device settings for video, slides, and audio.
Was this Information helpful?
Let us know if you found this lesson helpful. That’s the only way we can improve.
Modal title
Main Content